1.密度小，可以通過改變和回復形狀對外界沖擊力進行緩沖，因此具有良好的抗沖擊能力;

1. The density is small, and the external impact force can be buffered by changing and restoring the shape, so it has good impact resistance;

2、其表面吸水率低，防滲透性能好，能夠有效避免墻面受潮后發霉、脫落等墻面問題;

2. Its surface water absorption is low, and its anti-permeability performance is good, which can effectively avoid wall problems such as mildew and falling off after the wall is damp;

3、具有獨立的氣泡結構，小面積的損傷不會影響到整面墻體;

3. With independent bubble structure, small area damage will not affect the whole wall;

4、聚苯乙烯泡沫是可回收材料，能夠回收使用，其回收程度是塑料中高的;

4. Polystyrene foam is a recyclable material, which can be recycled, and its recycling degree is the highest among plastics;

5、生產工藝中不使用氟利昂，不會產生對臭氧層的破壞;

5. Freon is not used in the production process, which will not damage the ozone layer;

6、不受氣溫影響。高溫時，濟南泡沫復合板不會因溫度過高而熔化流淌，低溫時也不會因為溫度過低而發生脆裂現象;

6. Not affected by temperature. At high temperature, foam composite plate will not melt and flow due to high temperature, and at low temperature, it will not embrittlement due to low temperature;

7、全生命周期的能耗在塑料制品中低的。

7. The energy consumption of the whole life cycle is low in plastic products.

8、施工需要掛網，施工過程繁瑣，工期長;

8. The construction needs to hang the net, the construction process is cumbersome and the construction period is long;

9、易燃、燃燒后產生有毒氣體。普通的泡沫復合板容易燃燒，燃燒產生的煙霧中有毒性，即便添加阻燃劑之后，燃燒性也僅能達到B級;

9. Inflammable and toxic gas generated after combustion. Ordinary foam composite board is easy to burn, and the smoke generated by combustion is toxic. Even after adding flame retardant, the combustibility can only reach Grade B;

10、材料強度差，容易產生開裂現象、保溫層脫落現象比較普遍;

10. The material strength is poor, easy to crack, and the phenomenon of insulation layer falling off is relatively common;

11、泡沫復合板由于其自身強度有限，承重能力差，貼面磚時需要進行加強處理;

11. Due to its limited strength and poor load-bearing capacity, foam composite boards need to be strengthened when facing bricks;

12、泡沫復合板質量不穩定，因為材料出廠前需要放置一段時間，經過一段成熟期才可以使用，如果未熟化，質量將無法得到保證，導致泡沫復合板收縮開裂。還有什么產品事項歡迎來我們網站http://m.km6lz.com咨詢！

12. The quality of foam composite board is unstable, because the material needs to be placed for a period of time before leaving the factory and can be used after a period of maturity. If it is not matured, the quality will not be guaranteed, leading to shrinkage and cracking of foam composite board. What other product matters are welcome to our website http://m.km6lz.com consulting service