就現階段的樓承板使用率來看，需求量在不斷升高，那么樓承板一般會在哪里出現問題？下面濟南樓承板廠家為您解說。

In terms of the utilization rate of floor bearing plates at the current stage, the demand is increasing. Where will the problems of floor bearing plates generally occur? Next, Jinan floor bearing plate manufacturer will explain.

1.樓承板出現問題，有一部分原因是出在安裝環節。安裝時應加強對技術人員的培訓，并加強實操，在施工前做好工作人員的相關培訓，除了理論部分的學習，還需要加強實際操作。在施工前期做好準備工作，并在施工期間加強監督、檢查和驗收。

1. The problem of floor bearing plate is partly caused by the installation link. During installation, the training of technicians and practical operation shall be strengthened, and the relevant training of staff shall be done well before construction. In addition to the theoretical study, the practical operation shall also be strengthened. Make preparations in the early stage of construction, and strengthen supervision, inspection and acceptance during construction.

2.樓承板后期使用的情況，與施工安裝時的細節以及檢驗有很大關系，尤其是漏水對樓承板以及整個鋼結構工程的影響，因此，樓承板廠家會在防漏方面關注度比較多。例如：有缺陷的鎖縫、釘子等部位需進行加固，如嚴重不合格，須進行調換；易積水的部分，應加收邊板進行修改等。

2. The later use of the floor bearing plate has a lot to do with the details and inspection during construction and installation, especially the impact of water leakage on the floor bearing plate and the entire steel structure project. Therefore, the floor bearing plate manufacturer will pay more attention to leakage prevention. For example, defective lock seams, nails and other parts need to be reinforced. If they are seriously unqualified, they must be replaced; For the part easy to accumulate water, the edge plate shall be added for modification.

3.樓承板的保養還有一個方面就是防火性能的保持。防火性能高是樓承板的一大優勢，萬一火災發生，樓承板是一個很好的阻燃屏障。平時使用和年檢時要檢查其防火性能有無降低，內部結構有無變化，因為這會影響到防火能力，甚至危害到生命和財產。因此，這一點是許多樓承板廠家在售后中特別囑咐和服務的一點。

3. Another aspect of the maintenance of floor bearing plate is the maintenance of fire resistance. High fire resistance is a major advantage of floor bearing plate. In case of fire, floor bearing plate is a good flame retardant barrier. During normal use and annual inspection, it is necessary to check whether the fire resistance is reduced and whether the internal structure is changed, because this will affect the fire resistance, even endanger life and property. Therefore, this is a point that many floor bearing plate manufacturers specially instruct and provide service during after-sales.

樓承板廠家越來越多，但和產品的品質一樣良莠不齊，因此，在選擇合作廠家時定要擦亮眼睛。同時，作為廠家來說，也要努力做一家負責任的、靠得住的企業。這樣的企業在售后服務方面做的很到位，當樓承板后續出現損壞、需要維護等方面的問題時，他們是相對有經驗的。接下來，我們就來學習幾種樓承板的保養方式。更多相關事項就來我們http://m.km6lz.com這里看看吧！

There are more and more manufacturers of floor bearing plates, but the quality is as good as that of the products. Therefore, we must be careful when choosing a cooperative manufacturer. At the same time, as a manufacturer, we should strive to be a responsible and reliable enterprise. Such enterprises do a good job in after-sales service. They are relatively experienced when the floor bearing plate is damaged or needs maintenance. Next, we will learn several maintenance methods of floor bearing plates. Come to us for more related matters http://m.km6lz.com Look here!