1. Production process: The production process of rock wool board is made using the internationally advanced pendulum method of three-dimensional interweaving, while glass wool cannot use this construction process and can only be produced using the flat weaving method. Its strength illegally meets the requirements for climbing on the wall.

2. 酸度系數：巖棉板的酸度系數≥1.6，玻璃棉的酸度系數≤1.6。而酸度系數越高對板的強度，耐高溫，耐久性等性能有顯著的提高。

2. Acidity coefficient: The acidity coefficient of rock wool board is ≥ 1.6, and the acidity coefficient of glass wool is ≤ 1.6. The higher the acidity coefficient, the greater the strength, high temperature resistance, and durability of the board.

3. 強度要求：作為可以用于上墻的A級材料（棉制品），所要滿足兩方面強度的要求，1）是壓縮強度需≥40Kpa，2）垂直于板面的拉伸強度需≥7.5Kpa。玻璃棉的這兩個指標為0。

3. Strength requirements: As an A-grade material (cotton product) that can be used for wall mounting, it must meet two strength requirements: 1) the compressive strength must be ≥ 40Kpa, and 2) the tensile strength perpendicular to the board surface must be ≥ 7.5Kpa. These two indicators of glass wool are 0.

4. 尺寸穩定：巖棉板的尺寸穩定性相對比較穩定為≤1%，而玻璃棉的尺寸穩定性在≥8%。尺寸穩定性對保溫系統有著至關重要的影響，尺寸穩定性差，容易使保溫板膨脹或收縮，導致飾面層破壞，影響保溫系統。

4. Dimensional stability: The dimensional stability of rock wool board is relatively stable at ≤ 1%, while the dimensional stability of glass wool is ≥ 8%. Dimensional stability has a crucial impact on the insulation system. Poor dimensional stability can easily cause expansion or contraction of the insulation board, leading to damage to the decorative layer and affecting the insulation system.

5. 施工方面：巖棉板所采用的是粘釘結合的方式，此方式大大保證的巖棉板的安全性，而玻璃棉由于其特性不能進行抹灰，故只能進行錨固形式固定，而玻璃棉沒有壓縮強度，所以板子本身相對較軟，在錨固施工時很難施工。其安全性也相對降低。巖棉板施工容易，平整度能有效控制，玻璃棉無法保證其平整度。

5. Construction: The rock wool board adopts a bonding method of adhesive nails, which greatly ensures the safety of the rock wool board. However, glass wool cannot be plastered due to its characteristics, so it can only be fixed by anchoring. Glass wool does not have compressive strength, so the board itself is relatively soft, making it difficult to construct during anchoring construction. Its safety is also relatively reduced. The construction of rock wool board is easy, and the flatness can be effectively controlled. Glass wool cannot guarantee its flatness.

6. 工作溫度：巖棉板的工作溫度在≥650℃；玻璃棉的工作溫度在≥250℃，雖然同為A1級防火材料，但兩者在工作溫度上的差別還是相當明顯的。

6. Working temperature: The working temperature of rock wool board is ≥ 650 ℃; The working temperature of glass wool is ≥ 250 ℃, although both are A1 grade fireproof materials, the difference in working temperature between the two is still quite significant.

7. 耐火時間：巖棉板耐火時間為4h；玻璃棉的耐火時間為0.5h。

7. Fire resistance time: The fire resistance time of rock wool board is 4 hours; The fire resistance time of glass wool is 0.5 hours.

8. 導熱系數：巖棉板的導熱系數為≤0.040(W/m·k)（政府規定），目前實際導熱系數能做到0.036（W/m·k）~0.037（W/m·k）。與玻璃棉的0.035（W/m·k）的導熱系數基本差不多。

8. Thermal conductivity: The thermal conductivity of rock wool board is ≤ 0.040 (W/m · k) (government regulations), and currently the actual thermal conductivity can reach 0.036 (W/m · k) to 0.037 (W/m · k). The thermal conductivity is basically similar to 0.035 (W/m · k) of glass wool.

9. 干密度：相對于巖棉板140~160kg/m?的干密度，玻璃棉的10~16kg/m?就輕了很多，這是玻璃棉的一大優勢。

9. Dry density: relative to rock wool board 140-160kg/m? The dry density of glass wool is 10-16kg/m? It's much lighter, which is a major advantage of glass wool.

10. 吸水性：憎水型巖棉板的憎水率為≥99%，吸水率為≤1kg/m?（浸水24h的吸水率），而玻璃棉的吸水率為≥3kg/m?。同時玻璃棉的尺寸穩定性又比巖棉板要差。一旦吸水，很容易膨脹，從而破壞保溫系統。

10. Water absorption: The water absorption rate of hydrophobic rock wool board is ≥ 99%, and the water absorption rate is ≤ 1kg/m? (Water absorption rate after 24 hours of immersion), while the water absorption rate of glass wool is ≥ 3kg/m?. At the same time, the dimensional stability of glass wool is worse than that of rock wool board. Once water is absorbed, it is easy to expand, thereby damaging the insulation system.